Portable Agitator

Sorry, your ID is maybe not correct. And please make sure that your selected element is developed with Swiper.

Introduction of Portable Agitator

Not every mixing job needs a tank with a permanently fixed drive on it. Small batches, drums, IBC totes, trial runs, and mobile processes all call for something that can move from one vessel to the next without a full installation each time. At Premix Technologies in Ahmedabad, Gujarat, we design and manufacture Portable Agitators built for exactly that kind of flexibility – clamp it onto a drum or tank, run the batch, move it to the next one when you’re done. We’ve supplied these into chemical blending setups, paint and coating batches, pharmaceutical trial mixing, and general-purpose plant use where a fixed agitator on every vessel just isn’t practical. The idea is simple: give plants a mixing tool that goes where the work is, without sacrificing the build quality or performance of a fixed installation. Getting a portable unit to actually deliver that, batch after batch, on different vessel sizes and different products, takes more than scaling down a standard agitator.

Technical Parameters

Aspect Typical Capability / Range Value Proposition for Reactor Applications
Motor Drive Power From 2.2 kW to over 1000 kW Provides the precise power required for intense mixing, high-viscosity processing, and effective mass/heat transfer in reactors of all scales and chemistries.
Reactor Volume Adaptation Suitable for reactors from 1 m³ to over 500 m³ Designed for optimal mixing performance across a wide range of reactor sizes, ensuring consistent conditions and efficient reactions from pilot to full production scale.
Operating Pressure From Atmospheric to over 300 Bar (30 MPa) Engineered for high-pressure reactor applications, ensuring mechanical integrity and reliable sealing under extreme conditions common in chemical synthesis.
Operating Temperature From -50°C to over +400°C Capable of operating in a broad spectrum of temperatures, facilitating precise thermal control for exothermic or endothermic reactions.
Product Viscosity Handling From 1 cP (water-like) up to 1,000,000+ cP (for polymers/pastes) Versatile mixing capabilities to effectively agitate fluids across an immense viscosity range, crucial for diverse chemical reactions and product states.
Impeller Diameter From 200 mm to over 4000 mm Custom-sized impellers optimized for specific reactor geometries and reaction needs, ensuring efficient fluid dynamics for mass transfer, solids suspension, and heat exchange.
Shaft & Bearing System Heavy-duty, high-precision shafts (e.g., 50 mm to 500 mm diameter), engineered bearing supports Designed for exceptional rigidity and minimal deflection under high loads, critical for maintaining seal integrity and smooth operation in demanding reactor environments.
Impeller Technology Axial Flow (Hydrofoils, Pitched Blades), Radial Flow (Rushton, Disc), High Shear, Anchor, Helical Ribbon, Gassing Impellers, Special Custom Designs A comprehensive array of impeller types selected to precisely match reaction kinetics, phase dispersion, and desired mixing intensity for optimal process outcomes.
Material Construction (Wetted) SS304, SS316L, Duplex Stainless Steels, Hastelloy, Inconel, Titanium, Glass-Lined Steel, PTFE/Rubber Linings Materials are rigorously chosen for superior resistance to the specific corrosive and erosive nature of reaction media, ensuring product purity and equipment longevity.
Seal System Robust Mechanical Seals (single, double, cartridge), Magnetic Drives, Packed Gland Seals Advanced sealing solutions engineered for high-pressure, high-temperature, corrosive, or sterile environments, ensuring zero leakage and maximum safety.
Compliance & Safety Designed to ASME, PED, ATEX/IECEx (Ex-proof), cGMP (for Pharma), and other relevant industry standards Strict adherence to international safety and quality regulations, providing assurance for operators and facilitating regulatory approvals.

Why Customers Choose Premix Technologies

A portable agitator gets moved around, clamped and unclamped repeatedly, and used across a range of products and vessel sizes – conditions that wear out a poorly built unit fast. We build every Portable Agitator around that kind of repeated, varied use, not as a scaled-down version of a fixed-tank design. That’s usually the first thing customers notice once they start comparing us against other Portable Agitator Manufacturers.

Mixing Performance That Travels With You

Effective mixing across drum and tote sizes. Our Portable Agitators are sized to handle standard drums, IBC totes, and small to mid-size vessels, giving consistent mixing performance whether the batch is small or moderately large.

Fast setup and breakdown. A clamp-mount or bracket-mount design means the unit goes onto a vessel and comes off again quickly, without needing a permanent fitting or extended downtime between jobs.

Adjustable positioning for different vessels. Adjustable mounting angle and shaft length let the same unit work across a range of vessel shapes and depths, instead of needing a separate agitator for every container size in the plant.

Built for Frequent Handling and Varied Duty

Rugged construction for repeated use. Portable units take more physical handling than a fixed installation – clamped on, moved, clamped on again. We build the frame, clamp, and shaft to hold up to that kind of repeated use without loosening or wearing out early.

Compatible with a range of products. Whether it’s a low-viscosity liquid or something thicker, our Portable Agitators are sized around the actual mixing duty rather than offering one fixed speed for every application.

Sanitary options where required. For pharmaceutical, food, or cosmetic applications, we offer stainless steel wetted parts and finishes suited to those hygiene requirements, not just an industrial-grade unit repurposed for sensitive product.

Reliable Performance, Job After Job

Motor sized for consistent output. We match motor power to the mixing duty so the unit performs the same way on job ten as it did on job one, without straining or underperforming.

Low maintenance design. Fewer moving parts that need regular attention, and a layout that makes cleaning and basic upkeep straightforward between uses.

Sized Around Your Application, Not a Fixed Spec

Custom configuration where needed. While portability means a more standardized build than a large fixed agitator, we still size shaft length, impeller type, and motor rating around your typical vessel size and product viscosity.

Works across departments and applications. The same Portable Agitator can move between R&D, quality control, small batch production, and general plant use, cutting down on the need for multiple fixed units.

Where These Agitators Get Used

We’ve placed Portable Agitators across a wide range of industries and applications. As one of the established Portable Agitator Suppliers, our units show up in:

Use In Industry

Delivering precision-engineered mixing and dosing solutions across diverse industrial sectors with reliability and performance.

Practical Engineering Behind the Design

Portable Agitators don’t go through the same large-scale CFD process a fixed reactor or storage tank agitator might, but the same underlying engineering discipline applies. Our team looks at impeller type, shaft length, and motor sizing based on the vessel sizes and product viscosities customers are actually working with, so the unit performs consistently rather than mixing on some batches and being underpowered on others.

This practical approach to sizing is part of why customers evaluate us against other Portable Agitator Manufacturers and Portable Agitator Exporters on real-world performance rather than price alone. We look at how the unit will actually be used – which vessels, which products, how often it moves – before recommending a configuration.

What We Look At Before Recommending a Unit

What That Means for the Customer

Work With Premix Technologies on Your Next Portable Mixing Need

Plants that handle small batches, trial runs, or varied vessel sizes need mixing equipment that’s ready to move with the work, not tied down to one tank. That’s what goes into every Portable Agitator we build, starting with a conversation about your vessels and products, then moving through configuration, manufacturing, and delivery. We’re based in Ahmedabad and work with plants well beyond it, which is part of why customers comparing Portable Agitator Suppliers usually end up asking us for a quote. Buyers researching Portable Agitator Exporters tend to land on the same conclusion once they start checking references.
Get in touch with Premix Technologies, and we’ll put together a recommendation built around your actual vessels and products, not a generic one-size-fits-all unit. Whether you’re comparing us against other Portable Agitator Suppliers or reaching out directly, we’re happy to walk through the details with you.

Related Products

Frequently Asked Questions

Q1. What is a Portable Agitator used for?

It’s a mixing unit that clamps onto drums, totes, or small tanks, mixes the batch, and then moves to the next vessel rather than staying permanently fixed to one tank. We build these for plants that need flexible mixing across multiple vessels or batch sizes.

Chemical blending, paint and coatings, pharmaceutical trial batches, cosmetics, adhesives, and food and beverage small-batch mixing all rely on this kind of equipment. As Portable Agitator Manufacturers, we’ve supplied units across most of these sectors out of our Ahmedabad facility, with exports going outside India as well.

Tell us the typical vessel sizes you’ll be mixing in, the product viscosity, and how often the unit needs to move between vessels. Our team recommends the right motor size, shaft length, and impeller before quoting anything.

Yes – motor, clamp or bracket mount, shaft, and impeller come together as one tested unit, ready to fit onto your drums, totes, or small tanks straight out of the box.

A lot of suppliers treat portable units as a smaller version of a fixed agitator without accounting for how much handling and repositioning they actually go through. We build around that repeated use from the start, not as an afterthought – and that’s a big part of why customers who first spoke to other Portable Agitator Exporters and Portable Agitator Manufacturers have ended up placing their order with Premix instead.

1 Step 1
Contact Form
reCaptcha v3
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
FormCraft - WordPress form builder

Get in Touch

Have questions about our products or need a customized solution? Our team is ready to assist you with expert guidance, technical support, and reliable service. Reach out to us today and let’s build efficient solutions together.